Batam Jobs Vacancy: PT. PerkinElmer Batam

Jobs Title: Process Engineer (2)
Posting date: 28 June 2008
Closing date: NA
Jobs Location: Batam

PT. PerkinElmer Batam located in BIP Industrial estate Batam, currently seeking for qualified personnel to fill the following positions:


PROCESS ENGINEER I (PE I)
Jobs & Responsibilities
• To execute the process capability improvement program.
• To control, process performance metrics such as process capability (CpK), yield and scrap
• Perform defect failure analysis
• Develop Process Control System in order to have a robust process
• Develop Procedure and Work Instruction.
• Execute Productivity Quality Procurement (PQP) saving project in order to fulfill the department objective on continuous improvement initiatives.
• Work together with production and Industrial Engineering to support productivity improvement.
• Work together with New Product Introduction to support new product introduction.

Requirements:
• Degree in Chemistry or Chemical Engineering with 2 years experiences as Process Engineer.
• Experienced in Chemical Vapor Deposition are preferred.
• Hands-on in Statistical Process Control, process Failure Mode & Effect Analysis and its implementation.
• Able to communicate and interact effectively

PROCESS ENGINEER III (PE III)
Jobs & responsibilities
• To handle the process performance metrics such as Productivity Quality Procurement (PQP) saving, Scrap, Yield and process capability (Cpk) at one area.
• To review the effectiveness of present process control in order to have better process capability.
• Supervise some engineers to deliver and give support on each assigned PQP projects.
• To work with Quality Assurance in improving the product ppm level.
• Manage groups of PO and engineers team to fully comply with the requirements of routine process engineering activities.
• Coordinate with production, Maintenance, QA and other sections for outstanding concerns related to process activities.

Requirements:
• Degree in Electronics GPA> 2.5 with 3-5 years experience in manufacturing.
• Experienced on: PLC, Microprocessor-Controller, Hi Vacuum Rotary Equipment, Chemical Vapor Deposition are preferred.
• Good knowledge and skills in electronic and pneumatic troubleshooting.
• Hands-on in Statistical tool for manufacturing (SPC, DOE, Ho test, regression, FMEA, etc) and its implementation.
• Able to communicate and interact effectively

Please send your resume, photograph, expected salary and contact number to :

The Human Resource Department
PT. PerkinElmer Batam JL. Beringin Lot 207, 2nd Floor, Batam 29433
or e-mail to: hr.btm@perkinelmer.com
(email should not exceed than 100kb)
(Applicants who do not meet requirements are not encouraged to apply)

Read More......

Batam Jobs Vacancy: PT JMS Batam

Jobs Title: Accounting Officer, Human Resource Officer, Supervisor (Process Improvement Engineering, QA Laboratory, Sterilization)
Posting date: 28 June 2008
Closing date: 1 Week
Jobs Location: Batam

We are one of The Leading Manufacturer of Disposables Medical Devices. JMS Group Operated in 3 continents with worldwide market ESTABLISHED 1965, is looking for below candidate :


1. Accounting Officer-1 (Code : AO)
• Degree or Diploma in Accountancy.
• Experienced or fresh graduate
• Strong Interpersonal communication & analytical skill
• Knowledge of Oracle is an advantage

2. Human Resource Officer (Training)-1 (Code : HROT)
• Diploma or Degree in any discipline (preferable from English).

Responsible :
• Conduct general training.
• Review & revise training material when necessary
• Coordinate with sections’ trainers

3. Process Improvement Engineering Supervisor-1 ( Code : PIES )
• Male, Degree in Chemical Engineering or Mechanical Engineering

Responsible for :
• Machines & equipments validation programs either new or yearly basis.
• To ensure & monitor the setting parameters of machines & equipments are within specification.
• To upkeep the validation documents up-to-date
• Co-ordination among related departments (production, Quality Control & Technical) ”during the validation program

4. QA Laboratory Supervisor-1 (Code : QALAB)
• Degree in Chemical engineering or Chemistry
• Experienced or fresh graduate

Responsible:
• Conduct calibration , maintain & monitor environment, write validation for environmental test
• Investigation, environmental testing failure and write validation for environmental test

5. Sterilization Supervisor -3 ( Code : STZS )
• Male, Diploma/Polytechnic in Electrical or Mechanical Engineering
• Able to work in hot temperature room

Responsible :
• Daily Operation on ETO Sterilization
• Conduct Training to ETO Sterilization Operators
• Coordinate with QA Lab & Production Sections

GENERAL REQUIREMENTS :
• Fluent in English both oral and written.
• Computer literate.
• Able to work under pressure with Leadership and Analyzing ability

Please send the application letter with the position code to the address mentioned above latest one week after this advertisement to:

HUMAN RESOURCE DEPT. PT. JMS BATAM
JL. BERINGIN LOT 211, KAWASAN INDUSTRI
BATAMINDO, BATAM – 29433


Read More......

Batam Jobs Vacancy: PT McDERMOTT INDONESIA

Jobs Title: Senior Fab Admin, accountant
Posting date: 28 June 2008
Closing date: 10 Days
Jobs Location: Batam

PT McDERMOTT INDONESIA is the biggest offshore fabricator in Indonesia and one of the largest offshore construction companies in the world requires proficient, efficient, and highly motivated individuals for the following positions:

SENIOR FAB ADMIN AND ACCOUNTANT

Essentials Job Duties :
  • Reviewing and analyzing of Quarterly Fabrication Yard Expense Forecasts
  • Reviewing and analyzing of yearly Fabrication Yard Standards cost
  • Reviewing and analyzing Capital expenditure forecast and monitoring actual expenses, to ensure the submitted Capital Expenditure form is in accordance to existing policy.
  • Preparing Management presentation slides related to financial and fabrication activities
  • Providing associated analysis for financial and Fabrication activities to Senior management to assist decision making.
  • Maintain & updating chart of account
  • Monitoring Fabrication activity: man-hours, overhead cost, headcount reporting, job number and other management queries on accounting related and satisfying audit queries

Key Requirements :
  • D3/S1 accounting degree from reputable University
  • Minimum 3 years working experience in cost Accounting or related field and prefer having experience in handling Standards cost.
  • Successful candidate should possess strong interpersonal skills and work in a team, self motivated, independent, familiar with working under pressure environment, interact with senior manager & customer, leadership qualities.
  • Must have a Microsoft office applications skill
  • Strong communication skill: Indonesian and English, oral and written

If your vision of a work environment includes respect for ideas and colleagues who rank among the best, please apply. Send your application and resume with copy of qualification certificates and recent photograph (4x6cm) no later than 10 days to:

HR DEPARTMENT
PT McDERMOTT INDONESIA
Jl. Bawal Batu Ampar - Batam
Email : hrd.batam@mcdermott.com

Read More......

Batam Jobs Vacancy: PT. SANWA ENGINEERING BATAM

Jobs Title: ASST. QC, ASST Production Control Manager, Molding Technician, Molding Maintenance
Posting date: 28 June 2008
Closing date: NA
Jobs Location: Batam

PT. SANWA ENGINEERING BATAM located in BIP industrial estate batam, currently seeking for qualified personnel to fill the following positions:


1. ASST. QUALITY CONTROL MANAGER (ASST. QC)
• Female, good knowledge in "RoHS" requirements.
• Experience in ISO 9001 Internal Audit & QMS documentation procedure requirements.
• Good interpersonal skills to deal with Customer & all levels within organization.
• Good verbal and written communication.

2. ASSISTANT QC SUPERVISOR (QC - SUPV)
• Female, min 25 years of age.
• Min Diploma in any disciple.
• Having experience min 1 year at same position in molding company.
• Having experience with ISO 9001; 2K and Internal Audit.

3. ASST. PRODUCTION CONTROL MANAGER (ASST. PC)
• Min 30 years of age.
• Min Degree in any disciple.
• Experience in production planning, material planning, customer service and inventory control.

4. MAINTENANCE MOLDING (MAINT)
• Male, max 40 years old
• Min Diploma/ Degree in Mechanical/ Electrical
• Having experience min 5 years in the same position, preferably in plastic molding company
• Able to speak English
• Able to manage and ensure that all the factory machineries and plant is in good condition

5. MOLDING TECHNICIAN (MOLD - TECH)
• Male, max 30 years of age
• Min Technical High School
• Having experience min 2 years in injection molding
• Able to handle trouble shooting Please send details application to :

Human Resources Department
PT. SANWA ENGINEERING BATAM
Blok 215 A/B Jl. Beringin BIP Muka Kuning Batam 29433
Or send email to : hr.recruit@sanwaengineering.com
Please put the code on the left corner of the envelope.

Read More......

  © Blogger template 'Salji Fuji' by Ourblogtemplates.com 2008

Back to TOP